Consumer Guidelines

Maipo belief that its products not only make a customer but a friend Maipo also believes that the customer must get the best out of its products and for that it has evolved some customer guidelines which if followed ensure optimum and trouble free performance with enhanced durability of Maipo products for years to come.

The guidelines are:

  1. 1. Use 25mm pipelines instead of 20mm to ensure better flow of water for faucets and 40mm pipelines instead of 32mm for flush valves.
  2. 2. It is recommended to place the outlet point in the overhead tank at least 4 inches above the ground level of the tank this will avoid flow of foreign particles, sand etc. into the pipeline and also please clean the tank thoroughly before the supply starts. This will minimise the risk of damage to the working parts of the faucets.
  3. 3. It is recommended that overhead tank must be cleaned regularly to avoid deposition of solid particles.
  4. 4. Please test the working of all concealed fittings installed in a high pressure before plastering or fixing of tiles.
  5. 5. Centre to centre distance of pipe fitting for hot & cold inlet for all types of wall mounted mixers should be maintained at 165mm by which any of our wall mixers can be easily installed without any problem.
  6. 6. Please clean the aerators on the faucet outlet at a regular interval to keep the foam flow of water perfect.
  7. 7. Please protect the finish of faucets from dirt and other damages by covering them with cloth/polypack immediately after installation till they actually used.
  8. 8. Clean the faucets regularly with wet cotton cloth to maintain the finishes for years.
  9. 9. Use chalk powder/diluted vinegar to remove scaling/stains.
  10. 10. Please do not use strong detergents, harsh cleaning agents containing abrasives and acids as this may cause damage to the chrome finish.

"MIY" Maintain It Yourself

One of the major problems that the households face is the maintenance of taps. Even for a small problem you need to call a plumber and you end up feeling that the taps you purchase are too costly. But the problem will persist even with the leading brands because the water will always have dissolved particles in it and it will always clog the aerator resulting in low flow of water, MAIPO, a leading brand in quality taps brings you the solution. Along with technologically advanced, intelligent designs, value for money and 8 years warranty MAIPO brings to you "Maintain it yourself (MIY)" taps. Let's learn how!

LEARN HOW TO CLEAN A TAP

To keep the exterior finish of our product i.e. a Chromium Plated/Colbured Surface shining for years,clean it with the help of mild soap & water. Do not use abrasive sponge or scouring agents for cleaning.

We also advise you not to use cleaning agents containing solvent or acid, lime, scale remover, household vinegar and cleaning agents with acetic acid in them.

Clean Taps with a little soap and moist cloth only, then simply rinse off and wipe dry. You can avoid lime spots (White Spots) by drying the fiting each time it is used. After drying you can apply a coat of wax polish to protect the surface from selfement of water for a considerable period of time

LEARN HOW TO CLEAN THE AERATOR

Because of the dust, minerals and suspended particles that comes with the water the aerator gets clogged, resulting in low flow of water. The solution is not to remove the aerator but to clean it as it helps you get streamlined and anti-splash flow of water with reduced consumption of water as well.

1. To clean the aerator frst open the housing by unscrewing it clock wise, take out the aerator

2. Wash it with water, clean it and simply attach it again. Here you go steady high flow of water. Surely you save a few bucks here.

PRODUCT WARRANTY PERIOD
Faucets (Body) 7years
Faucets (Cartridge) 24 Months
Health Faucets 6 Months
Showers 6 Months
Flushing Cistern 12 Months
Silicon Spout Only 6 Months
Terms & COndiitons Apply:
  1. Rates are per Pc. Only.
  2. All Payment to be clear with in 30days from the billing date. Interest @24% p.a. will be charged on all over due account.
  3. Maximum Retail Price (MRP) is inclusive of GST.
  4. If you Returned Goods EXTRA 30% WILL BE DEDUCTED & TPT Charged will be paid by the Purchaser.
  5. All disputes are subject to Delhi Jurisdiction.
  6. Payment will be accepted by RTGS/NEFT or CBS Branch cheque payable at par.
  7. Our responsibility is upto the delivery of goods at TPT Delhi office. Any loss in transportation will be bome by the Purchaser. 8. This price list supersede our all previous price list.
  8. This price list supersede our all previous price list.